Tips For Replacing a Window Handle
Switching the handle on your window is an easy project that can be completed in the comfort of your own home. Follow these steps to ensure an elegant and smooth finish.
Begin by removing the screws to expose the screws within the uPVC window handle. Measure the spindle to make sure you're getting the right size replacement.
1. Measure the Spindle Length
When replacing a window handle it's important to determine the dimensions of the spindle right. It can affect the tightness or elasticity of the handle, as well as whether the handle will lock correctly into the window frame. The spindle is a metallic shaft that connects the handle to the lock inside the window frame. The spindle can be found in the standard 8mm cross-section for industry or the more traditional versions of 9mm. Modern industry standards are 8mm, but it wasn't always the case. It is important to verify the measurements prior to buying the handle you want to purchase.
The easiest method of measuring the length of the spindle is remove the handle that is currently in place, this can be done by turning it into the open position and unscrewing the two screws (which might be hidden behind plastic caps that will need to be removed) that retain the handle. After removing the handle, measure from the base of the handle to the end of the spindle. This will give you the measurement required to buy a replacement.
There are plenty of options when it comes to selecting a new window handle, from sleek chrome that can fit into modern homes to traditional brass that looks stunning in restored Georgian rooms or even the more classic Tudor cottages with curled monkey tail latches! There are many options, but the most important thing is to choose a style that matches your home's decor.
Espag handles are usually installed to uPVC windows and are the same size with 43mm centers (2 fixings). Cockspur handles are available in a range of sizes, starting at 58mm up to 62mm. Cadenza window handles have distinct dimensions because they have an angle blade that operates a multi-point lock mechanism inside the window.
Another aspect to consider when selecting the right window handle is determining what hand you require to use. This is determined by the hand you use to open the door. Inline Espag window handles aren't handed and can be utilized on right or left handed windows. Cranked window handles are only compatible with windows that are open in one direction.
2. Remove the Handle
A window handle that is sagging can be a hassle, regardless of regardless of whether the handle has been damaged or worn out. However, the good part is that replacing the uPVC window handle is a simple task that you can complete yourself. You only need some basic hand tools as well as some time to complete the task.
You will need to first open the window, and ensure that it is not locked. Next, you need to remove the screws that hold the handle in place. Once these caps are removed, you can begin to work on removing the handle itself.
The handle itself is fixed to a spindle within the window frame. Depending on the type the handle is held in place either with a screw or pin. The most popular handles are the inline Espagnolette and the cockspur handles. Both types of handles are available on casement windows, including aluminum ones. You can lock the handles with a key in order to block access by unauthorised persons from outside. Or you can lock the handles by turning them clockwise.
To remove the handle, you'll need an screwdriver with a flat blade in order to remove the clip that holds the handle. When this clip is released the handle will fall off the spindle. Once the old handle has been removed, you'll need to determine the length of the spindle and make sure that the new handle will fit.
Once you have the right size, you are able to put the new handle in place. It is crucial to ensure that the handle is securely fastened and that it rotates in the proper direction (clockwise in the case of an open or counterclockwise if the handle is closed). It is also essential to check that it is not fitted upside down.
Finally, you should replace the screw cap caps. Once you've completed this step, you should test the handle to make sure that it's working properly. It is also recommended to test the locking mechanism by moving the handle to the locked position and then returning it to the locked position.
3. Take off the Screws
A uPVC handle is a crucial part of any house and is the first thing to show signs of wear or damage. This can be due to natural factors, regular use, or even damage caused by criminals looking to gain access to your home. However, a simple repair can easily solve the problem and prevent the issue from happening again.
UPVC handles can also be difficult to remove when the locking mechanisms are not working correctly. It's often possible to solve the issue by replacing the multipoint locking mechanism rather than the whole handle. This could save you money.
After you've removed the old handle, you'll have to remove the screws that held it in place. The screws are typically located on the inside of the base of the handle. You may require a screwdriver for this and it's important to not over tighten, as this could cause the handle to become loose.
Then, you'll have to locate the screws or pins that hold the handle in place. They will likely be located on the inside of the base of the handle. you will need to use an screwdriver or a pair of pliers to take them off them. Once they're removed you will have to replace the caps on the screws in the event that you want to do so and test the new handle to ensure it's working properly.
If upvc replacement door handles repairmywindowsanddoors to put in the new handle, simply line up the spindle with the cut-out in the window mechanism and screw it in the appropriate position. Make sure that the handle is in the open position and that any screws are securely secured prior to replacing the screw covers should you wish to do so. Once this is complete you're all done and you are able to enjoy your new window handle. Hopefully this will help you save money on replacement of your door and window in the future. Contact us if you require more information on this or any aspect of your uPVC window.
4. Fit the New Handle
Whether you're replacing a broken handle or simply updating it the procedure is easy and can be accomplished in just a few steps. Identifying the kind of window handle, determining the length of its spindle and knowing what tools you'll require to complete the task are key. Safety is always the primary priority when working with tools and windows. It's also important to be patient and follow the steps with care to ensure you have a functioning handle that is safe to use.
To begin, find the screws that hold your window handle in place. Take them off while firmly gripping the handle to stop it from falling and causing injury. Once the screws are removed they can be repositioned in a safe spot to be replaced later.
After you have removed the handle, you are now able to put in your new one. The handle must be a perfect fit for it to function properly and keep the window in its closed position. Then, slide the metal bar that is square on the handle into the window mechanism hole.
Once your new handle is in place, the last thing to do is replace the caps on the screws and verify that it functions. If you're not happy with the outcome or if the window does not open and close as it should, the next step is to call our experts who will be able to assist you.
The majority of UK homes are equipped with uPVC Windows. This means that a lot of them will need to be changed at some point due to wear and tear or breakage. Anyone with some DIY experience can easily carry out the process. The most important factor in the success of the procedure is to ensure that you're using a handle that is compatible with your existing window in terms of size and design. If you're not sure what kind of handle you'll need, feel free to reach out to our team, who can provide you with the options available.